285/50R20 vs 275/55R20: Which Size Is Right?

275/55R20 is 0.69 inches taller than 285/50R20 (2.2%) and 0.39 inches narrower. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 61.3 mph.

275/55R20 · 31.91″ 285/50R20 · 31.22″
Both tires to scale. Dashed outline: 275/55R20

Side-by-side comparison

285/50R20275/55R20Difference
Diameter31.22″31.91″+0.69″ (+2.2%)
Width11.22″10.83″−0.39″
Sidewall5.61″5.95″+0.34″
Wheel20″20″same
Revs per mile646632−14
Ground clearance+0.34″

Speedometer difference

If your speedometer is calibrated for 285/50R20 and you fit 275/55R20, your real speed will be:

Speedometer reads30 mph45 mph60 mph75 mph
Actual speed30.7 mph46.0 mph61.3 mph76.7 mph

Will 275/55R20 fit?

This is a common factory diameter on half-ton trucks and midsize trucks and SUVs. Moving from 285/50R20 changes overall height by 0.69 inches, so check clearance at the upper control arm, fender liner and bumper at full steering lock.

FAQ

What is the difference between 285/50R20 and 275/55R20?

275/55R20 is 0.69 inches taller than 285/50R20 (2.2%) and 0.39 inches narrower. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 61.3 mph.

Can I replace 285/50R20 with 275/55R20?

Usually yes: the diameter difference is 2.2%, within the common 3% guideline. Check the wheel width range and load rating.

How much does 275/55R20 change ground clearance?

Ground clearance changes by half the diameter difference: 0.34 inches.