Tire Rubbing When Turning: Why It Happens and How to Fix It

By Ayaz Masood · Updated · 2 min read · How we calculate

Tire rubbing when turning usually means the tire is touching part of the body or suspension at full steering lock. It is most common after fitting bigger tires, wider wheels, or a leveling or lift kit. Occasional light rubbing at full lock is common on modified trucks, but rubbing while driving straight or over bumps needs attention.

Where tires rub

Look for scuff marks on the tire sidewall and rubber marks on plastic or metal parts to find the contact point.

Common causes

How to fix it

  1. Check alignment, especially after a lift or leveling kit
  2. Adjust or replace the wheels with a better offset or backspacing
  3. Trim or remove part of the fender liner or bumper, a common and inexpensive fix
  4. Do a body mount chop on trucks where the tire hits the mount (best left to a professional)
  5. Choose a slightly smaller tire size
  6. Add lift if the rub happens under compression

Is tire rubbing dangerous?

Light rubbing on plastic at full lock is mostly cosmetic. Rubbing on metal, suspension or steering parts can damage the tire sidewall and should be fixed before you drive further.

FAQ

Why do my tires rub after a leveling kit?

The kit lets you fit bigger tires, but the tire can still hit the fender liner or body mount at full lock. Trimming or a wheel with different offset usually fixes it.

Can a wheel alignment fix tire rubbing?

Sometimes, if the rub is caused by incorrect alignment after a suspension change.

Will 33s rub on a stock truck?

It depends on the truck. Many trucks fit 33s at stock height or with a leveling kit, while others need trimming. Check our 33 inch tires page for size options.