Can You Put Wider Tires on Stock Rims?

By Ayaz Masood · Updated · 2 min read · How we calculate

Often, yes, as long as your rim width falls inside the approved range for the new tire size. Every tire size has a range of rim widths it is designed to fit, set by the tire maker and industry standards. Staying inside that range keeps the tire's shape, handling and bead seating correct.

How to check if a wider tire fits your rim

  1. Find your rim width. It is usually stamped on the wheel, for example 17x8 means 17 inch diameter and 8 inches wide.
  2. Look up the new tire's approved rim width range on the tire maker's spec sheet.
  3. Make sure your width falls within that range.

A rough rule of thumb

Many tires list approved rim widths of roughly 70 to 85 percent of the tire's section width. As an example, many 265 mm truck tires list a range of around 7 to 9 inches. Treat this only as a guide: the spec sheet for your exact tire is what counts.

What happens if the rim is too narrow

What happens if the rim is too wide

Do not forget clearance

A wider tire on the same rim also sits slightly further inward and outward. Check that it clears the suspension, frame and fender liner at full steering lock and full suspension compression. Wider tires are often slightly taller too, so check overall height in our tire size calculator.

FAQ

Can I go up one tire width on my stock wheels?

Usually, for example from 265 to 275 on a typical truck wheel, if the rim width is in the new size's approved range.

How much wider can a tire be than the rim?

There is no fixed number; use the tire maker's approved rim width range for that specific size.

Will wider tires rub?

They might, especially at full lock. Check clearance before driving, or ask a shop to test fit.