285/60R20 vs 275/65R20: Which Size Is Right?
275/65R20 is 0.61 inches taller than 285/60R20 (1.8%) and 0.39 inches narrower. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 61.1 mph.
Side-by-side comparison
| 285/60R20 | 275/65R20 | Difference | |
|---|---|---|---|
| Diameter | 33.46″ | 34.07″ | +0.61″ (+1.8%) |
| Width | 11.22″ | 10.83″ | −0.39″ |
| Sidewall | 6.73″ | 7.04″ | +0.31″ |
| Wheel | 20″ | 20″ | same |
| Revs per mile | 603 | 592 | −11 |
| Ground clearance | +0.31″ | ||
Speedometer difference
If your speedometer is calibrated for 285/60R20 and you fit 275/65R20, your real speed will be:
| Speedometer reads | 30 mph | 45 mph | 60 mph | 75 mph |
|---|---|---|---|---|
| Actual speed | 30.5 mph | 45.8 mph | 61.1 mph | 76.4 mph |
Will 275/65R20 fit?
Around 34 inches usually calls for a leveling kit or a 2 to 3 inch lift on most trucks and SUVs. Moving from 285/60R20 changes overall height by 0.61 inches, so check clearance at the upper control arm, fender liner and bumper at full steering lock.
FAQ
What is the difference between 285/60R20 and 275/65R20?
275/65R20 is 0.61 inches taller than 285/60R20 (1.8%) and 0.39 inches narrower. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 61.1 mph.
Can I replace 285/60R20 with 275/65R20?
Usually yes: the diameter difference is 1.8%, within the common 3% guideline. Check the wheel width range and load rating.
How much does 275/65R20 change ground clearance?
Ground clearance changes by half the diameter difference: 0.31 inches.