285/65R20 vs 325/50R22: Which Size Is Right?
325/50R22 is 0.21 inches taller than 285/65R20 (0.6%) and 1.57 inches wider. That is within the 3% range most shops treat as a safe swap without recalibrating the speedometer. At an indicated 60 mph you would actually be doing 60.4 mph.
Side-by-side comparison
| 285/65R20 | 325/50R22 | Difference | |
|---|---|---|---|
| Diameter | 34.59″ | 34.80″ | +0.21″ (+0.6%) |
| Width | 11.22″ | 12.80″ | +1.57″ |
| Sidewall | 7.29″ | 6.40″ | −0.90″ |
| Wheel | 20″ | 22″ | +2″ |
| Revs per mile | 583 | 580 | −3 |
| Ground clearance | +0.10″ | ||
Speedometer difference
If your speedometer is calibrated for 285/65R20 and you fit 325/50R22, your real speed will be:
| Speedometer reads | 30 mph | 45 mph | 60 mph | 75 mph |
|---|---|---|---|---|
| Actual speed | 30.2 mph | 45.3 mph | 60.4 mph | 75.5 mph |
Will 325/50R22 fit?
This is in the 35-inch class. Most vehicles need a lift (often 2.5 to 4 inches) and sometimes trimming to fit without rubbing. Moving from 285/65R20 changes overall height by 0.21 inches, so check clearance at the upper control arm, fender liner and bumper at full steering lock.
FAQ
What is the difference between 285/65R20 and 325/50R22?
325/50R22 is 0.21 inches taller than 285/65R20 (0.6%) and 1.57 inches wider. That is within the 3% range most shops treat as a safe swap without recalibrating the speedometer. At an indicated 60 mph you would actually be doing 60.4 mph.
Can I replace 285/65R20 with 325/50R22?
Usually yes: the diameter difference is 0.6%, within the common 3% guideline. Check the wheel width range and load rating.
How much does 325/50R22 change ground clearance?
Ground clearance changes by half the diameter difference: 0.10 inches.