295/60R20 vs 285/65R20: Which Size Is Right?

285/65R20 is 0.65 inches taller than 295/60R20 (1.9%) and 0.39 inches narrower. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 61.1 mph.

285/65R20 · 34.59″ 295/60R20 · 33.94″
Both tires to scale. Dashed outline: 285/65R20

Side-by-side comparison

295/60R20285/65R20Difference
Diameter33.94″34.59″+0.65″ (+1.9%)
Width11.61″11.22″−0.39″
Sidewall6.97″7.29″+0.32″
Wheel20″20″same
Revs per mile594583−11
Ground clearance+0.32″

Speedometer difference

If your speedometer is calibrated for 295/60R20 and you fit 285/65R20, your real speed will be:

Speedometer reads30 mph45 mph60 mph75 mph
Actual speed30.6 mph45.9 mph61.1 mph76.4 mph

Will 285/65R20 fit?

This is in the 35-inch class. Most vehicles need a lift (often 2.5 to 4 inches) and sometimes trimming to fit without rubbing. Moving from 295/60R20 changes overall height by 0.65 inches, so check clearance at the upper control arm, fender liner and bumper at full steering lock.

FAQ

What is the difference between 295/60R20 and 285/65R20?

285/65R20 is 0.65 inches taller than 295/60R20 (1.9%) and 0.39 inches narrower. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 61.1 mph.

Can I replace 295/60R20 with 285/65R20?

Usually yes: the diameter difference is 1.9%, within the common 3% guideline. Check the wheel width range and load rating.

How much does 285/65R20 change ground clearance?

Ground clearance changes by half the diameter difference: 0.32 inches.