295/65R20 vs 315/75R17: Which Size Is Right?
315/75R17 is 0.50 inches taller than 295/65R20 (1.4%) and 0.79 inches wider. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 60.9 mph.
Side-by-side comparison
| 295/65R20 | 315/75R17 | Difference | |
|---|---|---|---|
| Diameter | 35.10″ | 35.60″ | +0.50″ (+1.4%) |
| Width | 11.61″ | 12.40″ | +0.79″ |
| Sidewall | 7.55″ | 9.30″ | +1.75″ |
| Wheel | 20″ | 17″ | −3″ |
| Revs per mile | 575 | 566 | −8 |
| Ground clearance | +0.25″ | ||
Speedometer difference
If your speedometer is calibrated for 295/65R20 and you fit 315/75R17, your real speed will be:
| Speedometer reads | 30 mph | 45 mph | 60 mph | 75 mph |
|---|---|---|---|---|
| Actual speed | 30.4 mph | 45.6 mph | 60.9 mph | 76.1 mph |
Will 315/75R17 fit?
This is in the 35-inch class. Most vehicles need a lift (often 2.5 to 4 inches) and sometimes trimming to fit without rubbing. Moving from 295/65R20 changes overall height by 0.50 inches, so check clearance at the upper control arm, fender liner and bumper at full steering lock.
FAQ
What is the difference between 295/65R20 and 315/75R17?
315/75R17 is 0.50 inches taller than 295/65R20 (1.4%) and 0.79 inches wider. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 60.9 mph.
Can I replace 295/65R20 with 315/75R17?
Usually yes: the diameter difference is 1.4%, within the common 3% guideline. Check the wheel width range and load rating.
How much does 315/75R17 change ground clearance?
Ground clearance changes by half the diameter difference: 0.25 inches.