295/70R18 vs 285/75R18: Which Size Is Right?

285/75R18 is 0.57 inches taller than 295/70R18 (1.7%) and 0.39 inches narrower. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 61.0 mph.

285/75R18 · 34.83″ 295/70R18 · 34.26″
Both tires to scale. Dashed outline: 285/75R18

Side-by-side comparison

295/70R18285/75R18Difference
Diameter34.26″34.83″+0.57″ (+1.7%)
Width11.61″11.22″−0.39″
Sidewall8.13″8.42″+0.29″
Wheel18″18″same
Revs per mile589579−10
Ground clearance+0.29″

Speedometer difference

If your speedometer is calibrated for 295/70R18 and you fit 285/75R18, your real speed will be:

Speedometer reads30 mph45 mph60 mph75 mph
Actual speed30.5 mph45.7 mph61.0 mph76.2 mph

Will 285/75R18 fit?

This is in the 35-inch class. Most vehicles need a lift (often 2.5 to 4 inches) and sometimes trimming to fit without rubbing. Moving from 295/70R18 changes overall height by 0.57 inches, so check clearance at the upper control arm, fender liner and bumper at full steering lock.

FAQ

What is the difference between 295/70R18 and 285/75R18?

285/75R18 is 0.57 inches taller than 295/70R18 (1.7%) and 0.39 inches narrower. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 61.0 mph.

Can I replace 295/70R18 with 285/75R18?

Usually yes: the diameter difference is 1.7%, within the common 3% guideline. Check the wheel width range and load rating.

How much does 285/75R18 change ground clearance?

Ground clearance changes by half the diameter difference: 0.29 inches.