295/70R18 vs 325/65R18: Which Size Is Right?
325/65R18 is 0.37 inches taller than 295/70R18 (1.1%) and 1.18 inches wider. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 60.7 mph.
Side-by-side comparison
| 295/70R18 | 325/65R18 | Difference | |
|---|---|---|---|
| Diameter | 34.26″ | 34.63″ | +0.37″ (+1.1%) |
| Width | 11.61″ | 12.80″ | +1.18″ |
| Sidewall | 8.13″ | 8.32″ | +0.19″ |
| Wheel | 18″ | 18″ | same |
| Revs per mile | 589 | 582 | −6 |
| Ground clearance | +0.19″ | ||
Speedometer difference
If your speedometer is calibrated for 295/70R18 and you fit 325/65R18, your real speed will be:
| Speedometer reads | 30 mph | 45 mph | 60 mph | 75 mph |
|---|---|---|---|---|
| Actual speed | 30.3 mph | 45.5 mph | 60.7 mph | 75.8 mph |
Will 325/65R18 fit?
This is in the 35-inch class. Most vehicles need a lift (often 2.5 to 4 inches) and sometimes trimming to fit without rubbing. Moving from 295/70R18 changes overall height by 0.37 inches, so check clearance at the upper control arm, fender liner and bumper at full steering lock.
FAQ
What is the difference between 295/70R18 and 325/65R18?
325/65R18 is 0.37 inches taller than 295/70R18 (1.1%) and 1.18 inches wider. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 60.7 mph.
Can I replace 295/70R18 with 325/65R18?
Usually yes: the diameter difference is 1.1%, within the common 3% guideline. Check the wheel width range and load rating.
How much does 325/65R18 change ground clearance?
Ground clearance changes by half the diameter difference: 0.19 inches.