315/60R20 vs 295/65R20: Which Size Is Right?
295/65R20 is 0.22 inches taller than 315/60R20 (0.6%) and 0.79 inches narrower. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 60.4 mph.
Side-by-side comparison
| 315/60R20 | 295/65R20 | Difference | |
|---|---|---|---|
| Diameter | 34.88″ | 35.10″ | +0.22″ (+0.6%) |
| Width | 12.40″ | 11.61″ | −0.79″ |
| Sidewall | 7.44″ | 7.55″ | +0.11″ |
| Wheel | 20″ | 20″ | same |
| Revs per mile | 578 | 575 | −4 |
| Ground clearance | +0.11″ | ||
Speedometer difference
If your speedometer is calibrated for 315/60R20 and you fit 295/65R20, your real speed will be:
| Speedometer reads | 30 mph | 45 mph | 60 mph | 75 mph |
|---|---|---|---|---|
| Actual speed | 30.2 mph | 45.3 mph | 60.4 mph | 75.5 mph |
Will 295/65R20 fit?
This is in the 35-inch class. Most vehicles need a lift (often 2.5 to 4 inches) and sometimes trimming to fit without rubbing. Moving from 315/60R20 changes overall height by 0.22 inches, so check clearance at the upper control arm, fender liner and bumper at full steering lock.
FAQ
What is the difference between 315/60R20 and 295/65R20?
295/65R20 is 0.22 inches taller than 315/60R20 (0.6%) and 0.79 inches narrower. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 60.4 mph.
Can I replace 315/60R20 with 295/65R20?
Usually yes: the diameter difference is 0.6%, within the common 3% guideline. Check the wheel width range and load rating.
How much does 295/65R20 change ground clearance?
Ground clearance changes by half the diameter difference: 0.11 inches.