Load Range C vs E: Which Tire Is Right for Your Truck?
By Ayaz Masood · Updated · 2 min read · How we calculate
Load range C and load range E are both light truck tire ratings. The difference comes down to strength and pressure: C is a 6 ply rating with a typical maximum of 50 psi, while E is a 10 ply rating with a typical maximum of 80 psi.
C vs E side by side
| Load range C | Load range E | |
|---|---|---|
| Ply rating | 6 | 10 |
| Typical max psi | 50 | 80 |
| Load capacity | Moderate | High |
| Ride | Softer | Firmer |
| Weight | Lighter | Heavier |
| Best for | Light trucks, light off-road | Towing, 3/4 and 1 ton trucks |
The key point most people miss
At the same pressure, a C tire and an E tire of the same size carry roughly the same weight. The E tire only carries more because it is built to run at higher pressure. If you run an E tire at 40 psi, you are getting C-level capacity with a stiffer casing.
When load range C makes sense
- Half-ton trucks and SUVs that rarely carry heavy loads
- Drivers who prioritise ride comfort
- Light trail use where you air down and want the tire to flex
When load range E makes sense
- 3/4 ton and 1 ton trucks, where it is usually required
- Frequent towing or heavy payloads
- Rocky terrain where sidewall puncture resistance matters
The cost difference
E tires usually cost more and weigh more. Extra unsprung weight can slightly affect acceleration, braking and fuel economy, especially in larger sizes like 35 inch tires.
FAQ
Can I run load range C tires on a 3/4 ton truck?
Usually not. Most 3/4 ton trucks specify load range E on the door placard because of their higher weight ratings.
Do load range E tires last longer than C?
Not necessarily. Tread life depends on the compound and design. E tires resist punctures better but do not automatically wear slower.
What psi for load range C tires?
The typical maximum is 50 psi. The right pressure depends on your load, so start with your placard or the tire maker's inflation table.