Load Range D Tires Explained
By Ayaz Masood · Updated · 2 min read · How we calculate
Load range D sits in the middle of the light truck tire range. It carries an 8 ply rating and most D tires have a maximum inflation pressure of about 65 psi. It is less common than C or E today, but it fills a useful gap.
Load range D specs
| Item | Load range D |
|---|---|
| Ply rating | 8 ply equivalent |
| Typical max pressure | 65 psi |
| Strength | Between C (6 ply) and E (10 ply) |
Where you will see load range D
D tires show up most often on trailers, some light truck sizes and certain mid-size pickups and vans. They are popular with drivers who want more strength than a C tire without the stiffness and weight of an E tire.
Load range D vs E
An E tire carries more weight at its higher maximum pressure. At the same pressure, however, a D and an E tire of the same size carry about the same load. The extra capacity of E only appears when you raise the pressure toward its higher limit.
That makes D a sensible middle ground for a lightly loaded truck: you get a tougher casing than a passenger tire, a ride that is usually softer than an E tire, and enough capacity for moderate towing. If you regularly tow heavy loads or drive a 3/4 ton truck, E is usually required.
How to inflate load range D tires
Start with your door placard. If you have switched from a passenger tire to an LT tire, use the tire maker's load and inflation chart to find the pressure that supports your vehicle's weight, instead of running the maximum on the sidewall.
FAQ
Is load range D the same as 8 ply?
Yes. Load range D is an 8 ply rating, describing strength rather than literal layer count.
Is load range D good for towing?
For light to moderate towing on a half-ton truck, often yes. For heavy trailers or 3/4 ton trucks, load range E is usually the right choice.
Can I replace load range E tires with D?
Only if D still meets the load your vehicle requires. If your placard calls for E, stay with E.