Load Range E Tires: What They Are and Who Needs Them
By Ayaz Masood · Updated · 2 min read · How we calculate
Load range E is a strength rating for light truck (LT) tires. An E tire has a 10 ply rating and, on most designs, a maximum inflation pressure of 80 psi. That combination lets it carry much more weight than a passenger tire of the same size.
Load range E at a glance
| Item | Load range E |
|---|---|
| Ply rating | 10 ply equivalent |
| Typical max pressure | 80 psi |
| Tire type | LT (light truck) |
| Common on | 3/4 ton and 1 ton trucks, towing rigs, overland builds |
The "10 ply" label is historical. Modern E tires do not literally have ten layers. It means the casing is as strong as an old ten-layer bias tire would have been.
How to tell if a tire is load range E
Check the sidewall for "LOAD RANGE E" or the letter E near the size, as in LT275/70R18 125/122S E. The listed maximum load and pressure are also printed there, usually near the bead.
Who needs load range E tires
- Owners of 3/4 ton and 1 ton pickups, which usually require E from the factory
- Anyone towing heavy trailers, where tongue weight presses on the rear tires
- Overland and camper builds that carry heavy gear full time
- Drivers on rocky trails who want stronger sidewalls against punctures
Do half-ton trucks need load range E?
Usually not. Most half-ton trucks come with P-metric or XL tires, and an E tire is stronger than they require. Many owners choose E anyway for durability off-road. The trade-offs are a firmer ride, more weight per tire and, often, slightly lower fuel economy.
If you fit E tires to a light truck, do not inflate them to 80 psi by default. Use the load and inflation table from the tire maker to find the pressure that carries your vehicle's actual weight. On an unloaded half-ton, that is often well below the maximum.
Load range E vs C and D
| Load range | Ply rating | Typical max psi |
|---|---|---|
| C | 6 | 50 |
| D | 8 | 65 |
| E | 10 | 80 |
| F | 12 | 95 |
The higher the letter, the more pressure the tire can hold and the more weight it can carry at that pressure. See our comparison of load range C vs E for a deeper look.
FAQ
What psi should load range E tires be?
The maximum is usually 80 psi, but the right pressure depends on load. Use your vehicle placard as a starting point and the tire maker's load and inflation table if you changed tire type.
Is load range E the same as 10 ply?
Yes. Load range E is described as a 10 ply rating, which reflects casing strength, not the literal number of layers.
Do load range E tires ride rough?
They ride firmer than passenger tires, especially if over-inflated. Setting pressure correctly for your load makes a big difference.