285/65R20 vs 325/60R20: Which Size Is Right?
325/60R20 is 0.77 inches taller than 285/65R20 (2.2%) and 1.57 inches wider. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 61.3 mph.
Side-by-side comparison
| 285/65R20 | 325/60R20 | Difference | |
|---|---|---|---|
| Diameter | 34.59″ | 35.35″ | +0.77″ (+2.2%) |
| Width | 11.22″ | 12.80″ | +1.57″ |
| Sidewall | 7.29″ | 7.68″ | +0.38″ |
| Wheel | 20″ | 20″ | same |
| Revs per mile | 583 | 570 | −13 |
| Ground clearance | +0.38″ | ||
Speedometer difference
If your speedometer is calibrated for 285/65R20 and you fit 325/60R20, your real speed will be:
| Speedometer reads | 30 mph | 45 mph | 60 mph | 75 mph |
|---|---|---|---|---|
| Actual speed | 30.7 mph | 46.0 mph | 61.3 mph | 76.7 mph |
Will 325/60R20 fit?
This is in the 35-inch class. Most vehicles need a lift (often 2.5 to 4 inches) and sometimes trimming to fit without rubbing. Moving from 285/65R20 changes overall height by 0.77 inches, so check clearance at the upper control arm, fender liner and bumper at full steering lock.
FAQ
What is the difference between 285/65R20 and 325/60R20?
325/60R20 is 0.77 inches taller than 285/65R20 (2.2%) and 1.57 inches wider. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 61.3 mph.
Can I replace 285/65R20 with 325/60R20?
Usually yes: the diameter difference is 2.2%, within the common 3% guideline. Check the wheel width range and load rating.
How much does 325/60R20 change ground clearance?
Ground clearance changes by half the diameter difference: 0.38 inches.