35x12.50R20 vs 325/60R20: Which Size Is Right?

325/60R20 is 0.35 inches taller than 35x12.50R20 (1.0%) and 0.30 inches wider. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 60.6 mph.

325/60R20 · 35.35″ 35x12.50R20 · 35.00″
Both tires to scale. Dashed outline: 325/60R20

Side-by-side comparison

35x12.50R20325/60R20Difference
Diameter35.00″35.35″+0.35″ (+1.0%)
Width12.50″12.80″+0.30″
Sidewall7.50″7.68″+0.18″
Wheel20″20″same
Revs per mile576570−6
Ground clearance+0.18″

Speedometer difference

If your speedometer is calibrated for 35x12.50R20 and you fit 325/60R20, your real speed will be:

Speedometer reads30 mph45 mph60 mph75 mph
Actual speed30.3 mph45.5 mph60.6 mph75.8 mph

Will 325/60R20 fit?

This is in the 35-inch class. Most vehicles need a lift (often 2.5 to 4 inches) and sometimes trimming to fit without rubbing. Moving from 35x12.50R20 changes overall height by 0.35 inches, so check clearance at the upper control arm, fender liner and bumper at full steering lock.

FAQ

What is the difference between 35x12.50R20 and 325/60R20?

325/60R20 is 0.35 inches taller than 35x12.50R20 (1.0%) and 0.30 inches wider. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 60.6 mph.

Can I replace 35x12.50R20 with 325/60R20?

Usually yes: the diameter difference is 1.0%, within the common 3% guideline. Check the wheel width range and load rating.

How much does 325/60R20 change ground clearance?

Ground clearance changes by half the diameter difference: 0.18 inches.