295/60R20 vs 35x12.50R20: Which Size Is Right?
35x12.50R20 is 1.06 inches taller than 295/60R20 (3.1%) and 0.89 inches wider. At 3.1%, the speedometer will be noticeably off and you should check clearance at full steering lock. At an indicated 60 mph you would actually be doing 61.9 mph.
Side-by-side comparison
| 295/60R20 | 35x12.50R20 | Difference | |
|---|---|---|---|
| Diameter | 33.94″ | 35.00″ | +1.06″ (+3.1%) |
| Width | 11.61″ | 12.50″ | +0.89″ |
| Sidewall | 6.97″ | 7.50″ | +0.53″ |
| Wheel | 20″ | 20″ | same |
| Revs per mile | 594 | 576 | −18 |
| Ground clearance | +0.53″ | ||
Speedometer difference
If your speedometer is calibrated for 295/60R20 and you fit 35x12.50R20, your real speed will be:
| Speedometer reads | 30 mph | 45 mph | 60 mph | 75 mph |
|---|---|---|---|---|
| Actual speed | 30.9 mph | 46.4 mph | 61.9 mph | 77.3 mph |
Will 35x12.50R20 fit?
This is in the 35-inch class. Most vehicles need a lift (often 2.5 to 4 inches) and sometimes trimming to fit without rubbing. Moving from 295/60R20 changes overall height by 1.06 inches, so check clearance at the upper control arm, fender liner and bumper at full steering lock.
FAQ
What is the difference between 295/60R20 and 35x12.50R20?
35x12.50R20 is 1.06 inches taller than 295/60R20 (3.1%) and 0.89 inches wider. At 3.1%, the speedometer will be noticeably off and you should check clearance at full steering lock. At an indicated 60 mph you would actually be doing 61.9 mph.
Can I replace 295/60R20 with 35x12.50R20?
Possibly, but the 3.1% diameter change is above the common 3% guideline. Check clearance, speedometer calibration and the wheel width range first.
How much does 35x12.50R20 change ground clearance?
Ground clearance changes by half the diameter difference: 0.53 inches.