325/50R22 vs 315/60R20: Which Size Is Right?
315/60R20 is 0.09 inches taller than 325/50R22 (0.2%) and 0.39 inches narrower. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 60.1 mph.
Side-by-side comparison
| 325/50R22 | 315/60R20 | Difference | |
|---|---|---|---|
| Diameter | 34.80″ | 34.88″ | +0.09″ (+0.2%) |
| Width | 12.80″ | 12.40″ | −0.39″ |
| Sidewall | 6.40″ | 7.44″ | +1.04″ |
| Wheel | 22″ | 20″ | −2″ |
| Revs per mile | 580 | 578 | −1 |
| Ground clearance | +0.04″ | ||
Speedometer difference
If your speedometer is calibrated for 325/50R22 and you fit 315/60R20, your real speed will be:
| Speedometer reads | 30 mph | 45 mph | 60 mph | 75 mph |
|---|---|---|---|---|
| Actual speed | 30.1 mph | 45.1 mph | 60.1 mph | 75.2 mph |
Will 315/60R20 fit?
This is in the 35-inch class. Most vehicles need a lift (often 2.5 to 4 inches) and sometimes trimming to fit without rubbing. Moving from 325/50R22 changes overall height by 0.09 inches, so check clearance at the upper control arm, fender liner and bumper at full steering lock.
FAQ
What is the difference between 325/50R22 and 315/60R20?
315/60R20 is 0.09 inches taller than 325/50R22 (0.2%) and 0.39 inches narrower. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 60.1 mph.
Can I replace 325/50R22 with 315/60R20?
Usually yes: the diameter difference is 0.2%, within the common 3% guideline. Check the wheel width range and load rating.
How much does 315/60R20 change ground clearance?
Ground clearance changes by half the diameter difference: 0.04 inches.