33x12.50R20 vs 285/60R20: Which Size Is Right?

285/60R20 is 0.46 inches taller than 33x12.50R20 (1.4%) and 1.28 inches narrower. That is within the 3% range most shops treat as a safe swap without recalibrating the speedometer. At an indicated 60 mph you would actually be doing 60.8 mph.

285/60R20 · 33.46″ 33x12.50R20 · 33.00″
Both tires to scale. Dashed outline: 285/60R20

Side-by-side comparison

33x12.50R20285/60R20Difference
Diameter33.00″33.46″+0.46″ (+1.4%)
Width12.50″11.22″−1.28″
Sidewall6.50″6.73″+0.23″
Wheel20″20″same
Revs per mile611603−8
Ground clearance+0.23″

Speedometer difference

If your speedometer is calibrated for 33x12.50R20 and you fit 285/60R20, your real speed will be:

Speedometer reads30 mph45 mph60 mph75 mph
Actual speed30.4 mph45.6 mph60.8 mph76.1 mph

Will 285/60R20 fit?

At roughly 32 to 33 inches, this is a popular upgrade. Many trucks fit it at stock height or with a leveling kit, but some need trimming or a small lift. Moving from 33x12.50R20 changes overall height by 0.46 inches, so check clearance at the upper control arm, fender liner and bumper at full steering lock.

FAQ

What is the difference between 33x12.50R20 and 285/60R20?

285/60R20 is 0.46 inches taller than 33x12.50R20 (1.4%) and 1.28 inches narrower. That is within the 3% range most shops treat as a safe swap without recalibrating the speedometer. At an indicated 60 mph you would actually be doing 60.8 mph.

Can I replace 33x12.50R20 with 285/60R20?

Usually yes: the diameter difference is 1.4%, within the common 3% guideline. Check the wheel width range and load rating.

How much does 285/60R20 change ground clearance?

Ground clearance changes by half the diameter difference: 0.23 inches.