Wheel Backspacing: Measure It, Convert It, Use It

By Ayaz Masood · Updated · 2 min read · How we calculate

Backspacing is the distance from a wheel's mounting surface to its inner edge, measured in inches. It tells you how far the wheel extends inward toward the suspension. Less backspacing pushes the wheel outward; more backspacing tucks it in.

How to measure backspacing

  1. Lay the wheel face down on a flat surface.
  2. Place a straight edge across the inner lip of the wheel.
  3. Measure straight down from the straight edge to the mounting pad.

That measurement in inches is the backspacing.

Converting offset to backspacing

Wheels are sold by width and offset, so this formula is useful:

Backspacing (in) = (wheel width + 1) / 2 + offset (mm) / 25.4

The extra inch accounts for the wheel's lips, since the overall width is about one inch more than the listed rim width.

WheelOffsetBackspacing
17x8+25 mm5.48 in
17x90 mm5.00 in
17x9-12 mm4.53 in
20x10-18 mm4.79 in
17x9+18 mm5.71 in

Why backspacing matters for tire fitment

Upgrading to 33 or 35 inch tires usually means reducing backspacing so the wider tire clears the suspension. Lift kit and wheel makers often publish recommended backspacing for each tire size.

FAQ

What is a good backspacing for a lifted truck?

It varies by vehicle, but many lifted trucks with 33 to 35 inch tires use somewhere around 4.5 to 5 inches. Always check the lift or wheel maker's recommendation.

Is backspacing the same as offset?

No. Offset is measured from the wheel centerline in millimeters; backspacing is measured from the inner lip in inches. They describe the same placement in different ways.

Does backspacing change with tire size?

No, backspacing is a property of the wheel. But larger tires need different backspacing to fit.