Negative Offset Wheels: What They Are and What They Change

By Ayaz Masood · Updated · 2 min read · How we calculate

Wheel offset is the distance between the wheel's mounting surface (where it bolts to the hub) and the centerline of the wheel, measured in millimeters. A negative offset wheel has its mounting surface behind the centerline, which pushes the wheel and tire outward, away from the vehicle.

Positive, zero and negative offset

OffsetMounting surfaceEffect on stanceCommon on
Positive (+)Toward the outside faceWheel sits inwardMost factory cars and trucks
Zero (0)At the centerlineNeutralSome aftermarket wheels
Negative (−)Toward the insideWheel pokes outwardLifted trucks, off-road builds

A wheel marked -12 has its mounting surface 12 mm inboard of center. A -44 wheel pushes the tire out considerably more.

Why people choose negative offset

The trade-offs

Some states and countries have rules about tires extending beyond the fender, so check local regulations if your wheels will poke out.

Offset vs backspacing

Backspacing is a related measurement in inches: the distance from the mounting surface to the inner lip of the wheel. More negative offset means less backspacing. Our backspacing guide shows how to convert between the two.

FAQ

Is negative offset bad for your truck?

Not bad, but it adds wear to bearings and steering parts. Moderate negative offset is common on lifted trucks; extreme offset increases the trade-offs.

What offset is best for 35 inch tires?

It depends on the vehicle, lift and wheel width. Many lifted trucks run somewhere between zero and moderate negative offset, but always check a fitment guide for your exact setup.

Does negative offset make the truck wider?

Yes. The tires sit further out, increasing track width and the overall width of the vehicle.