255/55R20 vs 285/50R20: Which Size Is Right?
285/50R20 is 0.18 inches taller than 255/55R20 (0.6%) and 1.18 inches wider. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 60.3 mph.
Side-by-side comparison
| 255/55R20 | 285/50R20 | Difference | |
|---|---|---|---|
| Diameter | 31.04″ | 31.22″ | +0.18″ (+0.6%) |
| Width | 10.04″ | 11.22″ | +1.18″ |
| Sidewall | 5.52″ | 5.61″ | +0.09″ |
| Wheel | 20″ | 20″ | same |
| Revs per mile | 650 | 646 | −4 |
| Ground clearance | +0.09″ | ||
Speedometer difference
If your speedometer is calibrated for 255/55R20 and you fit 285/50R20, your real speed will be:
| Speedometer reads | 30 mph | 45 mph | 60 mph | 75 mph |
|---|---|---|---|---|
| Actual speed | 30.2 mph | 45.3 mph | 60.3 mph | 75.4 mph |
Will 285/50R20 fit?
This is a common factory diameter on half-ton trucks and midsize trucks and SUVs. Moving from 255/55R20 changes overall height by 0.18 inches, so check clearance at the upper control arm, fender liner and bumper at full steering lock.
FAQ
What is the difference between 255/55R20 and 285/50R20?
285/50R20 is 0.18 inches taller than 255/55R20 (0.6%) and 1.18 inches wider. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 60.3 mph.
Can I replace 255/55R20 with 285/50R20?
Usually yes: the diameter difference is 0.6%, within the common 3% guideline. Check the wheel width range and load rating.
How much does 285/50R20 change ground clearance?
Ground clearance changes by half the diameter difference: 0.09 inches.