265/50R20 vs 285/50R20: Which Size Is Right?

285/50R20 is 0.79 inches taller than 265/50R20 (2.6%) and 0.79 inches wider. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 61.6 mph.

285/50R20 · 31.22″ 265/50R20 · 30.43″
Both tires to scale. Dashed outline: 285/50R20

Side-by-side comparison

265/50R20285/50R20Difference
Diameter30.43″31.22″+0.79″ (+2.6%)
Width10.43″11.22″+0.79″
Sidewall5.22″5.61″+0.39″
Wheel20″20″same
Revs per mile663646−17
Ground clearance+0.39″

Speedometer difference

If your speedometer is calibrated for 265/50R20 and you fit 285/50R20, your real speed will be:

Speedometer reads30 mph45 mph60 mph75 mph
Actual speed30.8 mph46.2 mph61.6 mph76.9 mph

Will 285/50R20 fit?

This is a common factory diameter on half-ton trucks and midsize trucks and SUVs. Moving from 265/50R20 changes overall height by 0.79 inches, so check clearance at the upper control arm, fender liner and bumper at full steering lock.

FAQ

What is the difference between 265/50R20 and 285/50R20?

285/50R20 is 0.79 inches taller than 265/50R20 (2.6%) and 0.79 inches wider. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 61.6 mph.

Can I replace 265/50R20 with 285/50R20?

Usually yes: the diameter difference is 2.6%, within the common 3% guideline. Check the wheel width range and load rating.

How much does 285/50R20 change ground clearance?

Ground clearance changes by half the diameter difference: 0.39 inches.