275/60R20 vs 295/60R20: Which Size Is Right?
295/60R20 is 0.94 inches taller than 275/60R20 (2.9%) and 0.79 inches wider. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 61.7 mph.
Side-by-side comparison
| 275/60R20 | 295/60R20 | Difference | |
|---|---|---|---|
| Diameter | 32.99″ | 33.94″ | +0.94″ (+2.9%) |
| Width | 10.83″ | 11.61″ | +0.79″ |
| Sidewall | 6.50″ | 6.97″ | +0.47″ |
| Wheel | 20″ | 20″ | same |
| Revs per mile | 611 | 594 | −17 |
| Ground clearance | +0.47″ | ||
Speedometer difference
If your speedometer is calibrated for 275/60R20 and you fit 295/60R20, your real speed will be:
| Speedometer reads | 30 mph | 45 mph | 60 mph | 75 mph |
|---|---|---|---|---|
| Actual speed | 30.9 mph | 46.3 mph | 61.7 mph | 77.1 mph |
Will 295/60R20 fit?
Around 34 inches usually calls for a leveling kit or a 2 to 3 inch lift on most trucks and SUVs. Moving from 275/60R20 changes overall height by 0.94 inches, so check clearance at the upper control arm, fender liner and bumper at full steering lock.
FAQ
What is the difference between 275/60R20 and 295/60R20?
295/60R20 is 0.94 inches taller than 275/60R20 (2.9%) and 0.79 inches wider. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 61.7 mph.
Can I replace 275/60R20 with 295/60R20?
Usually yes: the diameter difference is 2.9%, within the common 3% guideline. Check the wheel width range and load rating.
How much does 295/60R20 change ground clearance?
Ground clearance changes by half the diameter difference: 0.47 inches.