305/55R20 vs 295/60R20: Which Size Is Right?
295/60R20 is 0.73 inches taller than 305/55R20 (2.2%) and 0.39 inches narrower. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 61.3 mph.
Side-by-side comparison
| 305/55R20 | 295/60R20 | Difference | |
|---|---|---|---|
| Diameter | 33.21″ | 33.94″ | +0.73″ (+2.2%) |
| Width | 12.01″ | 11.61″ | −0.39″ |
| Sidewall | 6.60″ | 6.97″ | +0.36″ |
| Wheel | 20″ | 20″ | same |
| Revs per mile | 607 | 594 | −13 |
| Ground clearance | +0.36″ | ||
Speedometer difference
If your speedometer is calibrated for 305/55R20 and you fit 295/60R20, your real speed will be:
| Speedometer reads | 30 mph | 45 mph | 60 mph | 75 mph |
|---|---|---|---|---|
| Actual speed | 30.7 mph | 46.0 mph | 61.3 mph | 76.6 mph |
Will 295/60R20 fit?
Around 34 inches usually calls for a leveling kit or a 2 to 3 inch lift on most trucks and SUVs. Moving from 305/55R20 changes overall height by 0.73 inches, so check clearance at the upper control arm, fender liner and bumper at full steering lock.
FAQ
What is the difference between 305/55R20 and 295/60R20?
295/60R20 is 0.73 inches taller than 305/55R20 (2.2%) and 0.39 inches narrower. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 61.3 mph.
Can I replace 305/55R20 with 295/60R20?
Usually yes: the diameter difference is 2.2%, within the common 3% guideline. Check the wheel width range and load rating.
How much does 295/60R20 change ground clearance?
Ground clearance changes by half the diameter difference: 0.36 inches.