31x10.50R15 vs 255/55R20: Which Size Is Right?
255/55R20 is 0.04 inches taller than 31x10.50R15 (0.1%) and 0.46 inches narrower. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 60.1 mph.
Side-by-side comparison
| 31x10.50R15 | 255/55R20 | Difference | |
|---|---|---|---|
| Diameter | 31.00″ | 31.04″ | +0.04″ (+0.1%) |
| Width | 10.50″ | 10.04″ | −0.46″ |
| Sidewall | 8.00″ | 5.52″ | −2.48″ |
| Wheel | 15″ | 20″ | +5″ |
| Revs per mile | 651 | 650 | −1 |
| Ground clearance | +0.02″ | ||
Speedometer difference
If your speedometer is calibrated for 31x10.50R15 and you fit 255/55R20, your real speed will be:
| Speedometer reads | 30 mph | 45 mph | 60 mph | 75 mph |
|---|---|---|---|---|
| Actual speed | 30.0 mph | 45.1 mph | 60.1 mph | 75.1 mph |
Will 255/55R20 fit?
This is a common factory diameter on half-ton trucks and midsize trucks and SUVs. Moving from 31x10.50R15 changes overall height by 0.04 inches, so check clearance at the upper control arm, fender liner and bumper at full steering lock.
FAQ
What is the difference between 31x10.50R15 and 255/55R20?
255/55R20 is 0.04 inches taller than 31x10.50R15 (0.1%) and 0.46 inches narrower. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 60.1 mph.
Can I replace 31x10.50R15 with 255/55R20?
Usually yes: the diameter difference is 0.1%, within the common 3% guideline. Check the wheel width range and load rating.
How much does 255/55R20 change ground clearance?
Ground clearance changes by half the diameter difference: 0.02 inches.