31x10.50R15 vs 285/50R20: Which Size Is Right?
285/50R20 is 0.22 inches taller than 31x10.50R15 (0.7%) and 0.72 inches wider. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 60.4 mph.
Side-by-side comparison
| 31x10.50R15 | 285/50R20 | Difference | |
|---|---|---|---|
| Diameter | 31.00″ | 31.22″ | +0.22″ (+0.7%) |
| Width | 10.50″ | 11.22″ | +0.72″ |
| Sidewall | 8.00″ | 5.61″ | −2.39″ |
| Wheel | 15″ | 20″ | +5″ |
| Revs per mile | 651 | 646 | −5 |
| Ground clearance | +0.11″ | ||
Speedometer difference
If your speedometer is calibrated for 31x10.50R15 and you fit 285/50R20, your real speed will be:
| Speedometer reads | 30 mph | 45 mph | 60 mph | 75 mph |
|---|---|---|---|---|
| Actual speed | 30.2 mph | 45.3 mph | 60.4 mph | 75.5 mph |
Will 285/50R20 fit?
This is a common factory diameter on half-ton trucks and midsize trucks and SUVs. Moving from 31x10.50R15 changes overall height by 0.22 inches, so check clearance at the upper control arm, fender liner and bumper at full steering lock.
FAQ
What is the difference between 31x10.50R15 and 285/50R20?
285/50R20 is 0.22 inches taller than 31x10.50R15 (0.7%) and 0.72 inches wider. A gap this small is usually a direct swap: speedometer error stays under 3%. At an indicated 60 mph you would actually be doing 60.4 mph.
Can I replace 31x10.50R15 with 285/50R20?
Usually yes: the diameter difference is 0.7%, within the common 3% guideline. Check the wheel width range and load rating.
How much does 285/50R20 change ground clearance?
Ground clearance changes by half the diameter difference: 0.11 inches.